E3D Nozzle Fun Pack at IGO3D
Looking for a variety of brass nozzles? The Nozzle Fun Pack includes a variety of nozzle diameters, allowing you to experiment with different layer heights and extrusion widths. Please note—these nozzles are not compatible with Cyclops and Volcano HotEnds.
V6 Nozzles
V6 nozzles are designed for use with the E3D V6 heat block. Modify your hot end so you can print with small nozzle orifices to achieve fine details, or with larger nozzle orifices for more substantial, stronger prints.
Advantages of Brass
The brass nozzles, featuring E3D’s signature internal geometry, offer optimal thermal properties for everyday printing and provide smooth layers for standard applications without abrasion. Rated for a maximum temperature of 300°C.
The pack contains:
- 1 x 0.25 mm brass nozzle
- 1 x 0.2 mm brass nozzle
- 1 x 0.35 mm brass nozzle
- 1 x 0.5 mm brass nozzle
- 1 x 0.6 mm brass nozzle
- 1 x 0.8 mm brass nozzle
- 1 x E3D nozzle wrench
E3D Nozzle Pro Pack at IGO3D
Want to take your 3D printing skills to the next level? The Nozzle Pro Pack includes a variety of nozzle diameters and materials, allowing you to experiment with fine details, larger, sturdier prints, high-temperature filaments, and abrasive-filled filaments.
V6 Nozzles
V6 nozzles are designed for use with the E3D V6 heat block. Modify your hot end so you can print with small nozzle openings to achieve fine details, or with larger nozzle openings for more substantial, stronger prints.
Brass
The brass nozzles, featuring E3D’s signature internal geometry, offer optimal thermal properties for everyday printing and provide smooth layers for standard applications without abrasion. Rated for a maximum temperature of 300°C.
Plated Copper
Our unique plated copper nozzles are suitable for non-abrasive high-temperature applications. The nickel plating provides a surface with reduced adhesion, ideal for situations where temperatures are too high for a silicone sleeve. Rated for a maximum temperature of 500°C.
Hardened steel
Hardened steel nozzles are good all-purpose nozzles, suitable for abrasive filaments such as wood, glitter, and metal infills. Even filaments that glow in the dark can wear down brass, making hardened steel nozzles a great, more cost-effective option. Rated for a maximum temperature of 500°C. Please note that this nozzle is not suitable for printing with abrasive filaments at temperatures above 350°C.
The pack contains:
- 1 x 0.15 mm brass nozzle
- 1 x 0.8 mm brass nozzle
- 1 x 0.25 mm plated copper nozzle
- 1 x 0.4 mm plated copper nozzle
- 1 x 0.4 mm hardened steel nozzle
- 1 x 0.6 mm hardened steel nozzle
- 1 x E3D nozzle wrench
Online documentation
Free shipping on orders over €49
Professional advice & support
Fast shipping
