Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

3D-basics Isopropanol 5 L

SKU: ACAP-1013-002

3D-basics Isopropanol is used to clean printing plates (for FDM printers) and to remove uncured resin from SLA or DLP printed objects.

Weight (Please select): 1 L 1 L
5 L 5 L

46,20 €

9,24 € per 1 l

incl. 19% VAT , plus

Not in stock, but available for pre-order

Delivery time: ca. 3 weeks*
(DE - int. shipments may differ)

3D-basics Isopropanol 5 L

46,20 €

9,24 € per 1 l

incl. 19% VAT , plus

Fast shipping

13+ years experience

Secure payment

PayPal Plus Visa Apple Google Klarna Visa Mastercard Billie Vorkasse

Description
Contact

3D Basics Isopropanol—available from IGO3D

Isopropanol is a highly volatile, flammable, colorless, clear liquid used to remove and dissolve uncured resin from SLA and DLP 3D-printed parts. It is used in FDM 3D printing to clean parts and build plates and to smooth certain materials. Because it evaporates quickly, it dries out fast. Therefore, the container should not be left open any longer than necessary.

Application

Always wear gloves when handling IPA

To remove uncured resin from SLA- or DLP-printed parts, fill your cleaning container with the amount specified by the manufacturer. To minimize waste, it is recommended to pre-clean the parts before placing them in the cleaning vessel to extend the life of your fresh IPA. This can be done in a separate container using either “dirty” IPA from previous cleaning cycles or low-evaporation cleaners such as DPM, TPM, or PGDA. Place the finished print in the cleaning vessel and clean the parts for at least 5 minutes or according to the material manufacturer’s guidelines. After the cleaning cycle, let the model dry and check the surface for sticky residue; repeat if necessary until the surface is no longer sticky. If it is still sticky, replace the IPA.

To clean print plates from FDM printers, it can be diluted with distilled water in a ratio of 70% isopropanol to 30%.

Item information	Value