Cookiename	Beispielinhalt	Ablaufzeit
_ga_*	deleted	730 Tage
_ga	GA1.1.8643343795.1726666186	730 Tage

Magigoo 3D-Glue Stick PRO Kit for ABS, PA, PC, PP

Magigoo 3D-Glue Stick PRO Kit for ABS, PA, PC, PP

SKU: ACMG-3KIT-PK1

All-round solution for printing bed adhesion in the professional sector. Contains adhesive for polyamide, polycarbonate, polypropylene and ABS filaments.

€ 82,95

€ 414,75 per 1 l

incl. 19% VAT ,

Available immediately

Delivery time: 1 - 3 Workdays
(DE - int. shipments may differ)

Magigoo 3D-Glue Stick PRO Kit for ABS, PA, PC, PP

€ 82,95

€ 414,75 per 1 l

incl. 19% VAT ,

Fast shipping

13+ years experience

Secure payment

PayPal Plus Visa Apple Google Klarna Visa Mastercard Billie Vorkasse

Description
Contact
PDF (5)

The PRO Kit is designed for professional use in combination with technical materials

These adhesives ensure that prints adhere well while the printing plate is hot and are easy to remove once the plate has cooled down. Furthermore, adhesive residue is easy to clean off.

Magigoo PA was developed for professional use exclusively with polyamide filaments. It is designed and tested for a wide variety of PA (nylon) and fiber-reinforced filament brands.
Magigoo PC was developed for use exclusively with polycarbonate filaments and fiber-reinforced variants.
Magigoo PP was developed for use exclusively with polypropylene filaments.
Magigoo ABS was developed for general use with a wide variety of common filaments. It is ideal for ABS, PLA, HIPS, PETG, TPU, and similar filament types.

Tips:

Shake well before use.
Apply Magigoo by pressing the bottle’s nozzle onto the print bed. This opens the internal seal, allowing the material to be applied.
Print according to the filament manufacturer’s recommendations.
For larger prints, we recommend a 20mm brim.
Wait until the print is finished and the print bed has cooled down. The print should peel off the bed easily.
If you have difficulty removing it, you can, if possible, apply a little water to the print bed to help loosen the print.
Clean the print bed with a cloth dampened with water.

Safety Instructions:

These products are designed for professional use. Please read the instructions thoroughly before use.
Using the wrong filament type with the wrong Magigoo adhesive can result in excessive adhesion and cause damage to your print bed.
Some adhesives may contain substances that cause corrosion and eye irritation. Wash your hands after use. Ideally, we recommend nitrile gloves when using the adhesive.
If you have any further questions, please do not hesitate to contact us or the manufacturer directly.
Magigoo bottles have a spring-loaded cap. To open the bottle, you must press the cap onto the pressure plate.
If you squeeze the bottle on the sides, the front cap may pop out. Please never squeeze the bottle on the sides!